Roller Shutter Doors

Roller Shutter Doors

Oliver Door Systems provide a wide range of Roller Shutter Doors for both commercial and domestic properties. We visit and quote for your roller shutter doors, and provide a 24 hour emergency call out for urgent repairs required for your door systems.

Contact our friendly and reliable team today on 01256 760068.

 

Quality of Doors

Barrel assembly is made from high quality mild steel tube of varying diameters from 102mm up to 275mm with a wall thickness from 3.65mm to 10mm depending on door size. Internally mild steel blocks and bearings support a suitable bright drawn mild steel shaft for perfect concentric rotation.

 

Details of Doors

Brackets and Guides are typically constructed on a flag post arrangement for ease of installation, brackets are fabricated from galvanised/ mild steel plate with a minimum thickness of 3mm, a steel ‘U’ cup is welded to motor side bracket to support shaft and a safety brake unit is fitted to shaft on dummy end to prevent door free falling should chain link breakage occur, the guides are constructed from galvanised mild steel angle not less than 3mm thick to give an adequate projection together with a rolled guide channel section with a depth of 63mm, the shutter curtain is made of 75mm concave galvanised lath and a galvanised ‘T’ rail bottom section with appropriate cut out to suit opening all secured with suitable end locks to prevent lateral movement, barrel assembly can then be covered by a galvanised steel canopy.

 

Electrical Info’

Electrical operation will be via either a pre wired 3ph 415V 0.5Kw package, or a single phase tubular motor package both options come complete with a manual over ride facility should power failure occur. Roller Shutter Doors can be controlled by any means necessary please contact ODS with your personal requirements.

 

Learn More

roller shutter doors

Our Clients

Oliver Door Systems Oliver Door Systems Oliver Door Systems Oliver Door Systems Oliver Door Systems